logo transparent
THE LEADER

News
Original article published by Wood Business, written by Amie Silverwood and published on June 16th, 2014

In rural New Brunswick, a couple hours north of Moncton, a former logging contractor has sold his forest machines to invest in a green technology that will give local wood products the durability to compete with exotic hardwoods. The technology was developed in Finland where wood product manufacturers have found that simply heating lumber at very high temperatures changes the chemical composition of the wood to make it rot resistant.
Pierre Friolet worked in the forest for 20 years, but in 2008 he decided to give up the forest side as it became harder for the contractor to make a good wage. "It's all about how fast you're cutting it now and the technology that's coming out is just to cut faster and faster."

As wood prices go up, the sawmills are recouping more of the costs but the logging contractors aren't benefiting from the market improvement, Friolet explains. "I always loved the wood; we don't add enough value to our resources."

Finding more value in the woods
Value is what Friolet and his partner, Robert Lennon, are now adding to the lumber they're treating at Thermalwood Canada. Building on experience in the local wood products industry, they have carved out a niche to complement rather than compete with other local wood manufacturers. The method they use, thermal modification, can be used on any species, but Thermalwood Canada is narrowing in on hardwoods such as ash and maple.

"We're going to help to bring more value to the private woodlot owners in the area," explains Friolet. "We've gone down the road of hardwoods, which nobody else has really done - it has allowed us to open up a bunch of other niche markets."

tab blog3


How the process works
Experimental research on thermal modification of wood was carried out in the 1940s and 50s in the U.S. and Germany, but the industrial application of the process was developed in the 1980s. Research and development on industrial uses has resulted in the development of many thermal modification treatments including: Perdure (Canada), ThermoWood (Finland), Retification (France), Thermoholz (Austria), Intemporis (Switzerland), Iwotech (Denmark), and others.

The kiln Lennon and Friolet use was built by Valutec (which uses the technology developed by ThermoWood) completely out of stainless steel to resist the stress caused by high temperatures, acids and other compounds that evaporate from the wood. Using only heat, steam and water, the wood temperature is raised quickly to around 100 degrees Celsius.
Once the wood's moisture content is reduced to nearly zero, the actual thermal modification stage begins by bringing the temperature up to a level of 185 to 215 degrees Celsius depending on the wood species. The wood is kept at this temperature for a couple of hours in low oxygen and steam to prevent the wood from burning and to initiate chemical changes.

The temperature of the wood is then reduced using water to cool it and return some moisture to the lumber, for a moisture content between four to six per cent.

The whole process takes about 65 hours in the kiln and doesn't allow for any shortcuts. If shortcuts are taken and the thermal modification process is initiated before the wood has been completely dried, any moisture that is not removed in the first step of the process would become trapped within the wood's core as the lumber is heated from the outside in. As the temperatures increase and heat penetrates the wood, the moisture can result in stress and damages to the wood.

But cracks might not be immediately apparent. "If you sold it to somebody in a rough form, then they get it and they want to split it in half, the issues will start to show up then."
If thermal modification is done properly, however, the heat changes the molecular structure of the wood, improving the dimentional stability, improving its resistance to fungal decay and changing the colour of the wood throughout. Heating the wood to these temperatures results in the degradation of hemicellulose with water-binding properties and lignin reticulation indicating the formation of molecular chemical bonds.

The end product can last as decking for over 25 years and as a siding for over 50 years. Unlike pressure-treated lumber, nothing is added to the wood and the product can be made from local wood rather than imported exotic hardwoods. The end product, however, is less resistant to impact and abrasion, and the chemical changes in the wood accelerates discoloration when exposed to UV radiation or rain. Research in Finland has also found that thermal modified wood remains vulnerable to termites.

Developing a niche
Thermally modified wood requires no stains to protect it from the elements, though it will turn grey without it. If thermal modification is done slowly and carefully, there is very little shrinkage or warping during the treatment and the process blends any visual flaws that might have made the wood less desirable before modification.

To read more, please see the following link for complete article: http://www.woodbusiness.ca/remanufacturing/hot-asset

Get in Touch!

refresh

Powered by ChronoForms - ChronoEngine.com

Address

1750 Connelly Ave.
Bathurst, New Brunswick
E2A 4W7

Phone

(506) 548-9126